Enter a search term

Online Auction Due To The Reoganisation of Wescol Limited

Terms and conditions

Auction overview

Bidding starts: 14 Feb 2020 14:00:00 GMT
Ends: 05 Mar 2020 14:00:00 GMT
Auction catalog

Online Auction Due To The Reoganisation of Wescol Limited

Buyers Premium

15%

VAT where applicable

20%

Location: Wolverhampton, UK
Viewing: Strictly by appointment
Collection: Strictly by appointment before 20th March

Notice To Purchasers

10 minute overtime bidding rule applies.

These lots are located in UK, local VAT rates may apply, Buyer's outside of UK may be eligible for a zero rated invoice, please contact New England for more details.

Please note there are no loading facilities onsite.

These Lots to be Collected By 20th March 2020

Lots in this auction

 

Lot 1: CMZ TL20 M CNC Turning Centre

Preview image

Bidding on this lot has finished

CMZ TL20 M CNC Turning Centre, Fanuc series 32i-Series A control,S/N : 1253,YOM : 2011 with Hydrafeed Multifeed barfeed
TECHNICAL SPECIFICATIONS :
Capacity : Swing over bed : 680mm, Swing over cross slide : 510mm, Maximum turning diameter : 430mm, Distance between centres : 730mm. Driven tooling 4000rpm
Head ; Main head speed : 50-4000min, Main head power 30min/continous (Fanus) : 15/11 Kw (CV), Main head spindle nose : ASA 6" A2, Diameter of spindle bore : 73mm, Bar diameter : 67mm, Chuck diameter : 66mm, Front bearing outside diamter : 170mm, Front bearing inside diameter : 110mm
Sub-head : Sub head speed : 5000min, Sub-head power 30min/continous : 14/8 Kw (CV), Maximum rotation torque : 75 (7.6) Nm (Kg.m), Sub-head spindle nose : ASA 5" A2, Diameter of spindle bore : 43mm, Bar diameter : 34mm, Chuck diameter : 130mm, Chuck bore : 32mm, Front bearing ouside diameter : 125mm, Front bearing inside diameter : 80mm
Turret : Number of positions : 12, Indexing time between two adjacent positions : 0.15seg, Indexing time for 180degs : 0.4seg, External cutting tool shank square : 25mm, Maximum diamater of boring bar : 50mm, VDI turret (Optional) shank diamter : 40mm
Axis : X-Z-B axis displacement : 18/24/24, X-traverse : 240 (225+15)mm, Z-axis traverse : 640mm, B-axis traverse : 545mm with Empteezy 1000l swarf tipping bin (Asset 31116)

Lot 2: CMZ TL20 M CNC Turning Centre

Preview image

Bidding on this lot has finished

CMZ TL20 M CNC Turning Centre, Fanuc series 18i-TB control, Tailstock, S/N : 532, YOM : 2005 with Hydrafeed Multifeed barfeed
TECHNICAL SPECIFICATIONS :
Capacity : Swing over bed : 680mm, Swing over cross slide : 510mm, Maximum turning diameter : 430mm, Distance between centres : 730mm. Driven tooling 4000rpm
Head ; Main head speed : 50-4000min, Main head power 30min/continous (Fanus) : 15/11 Kw (CV), Main head spindle nose : ASA 6" A2, Diameter of spindle bore : 73mm, Bar diameter : 67mm, Chuck diameter : 66mm, Front bearing outside diamter : 170mm, Front bearing inside diameter : 110mm
Sub-head : Sub head speed : 5000min, Sub-head power 30min/continous : 14/8 Kw (CV), Maximum rotation torque : 75 (7.6) Nm (Kg.m), Sub-head spindle nose : ASA 5" A2, Diameter of spindle bore : 43mm, BAr diameter : 34mm, Chuck diameter : 130mm, Chuck bore : 32mm, Front bearing ouside diameter : 125mm, Front bearing inside diameter : 80mm
Turret : Number of positions : 12, Indexing time between two adjacent positions : 0.15seg, Indexing time for 180degs : 0.4seg, External cutting tool shank square : 25mm, Maximum diamater of boring bar : 50mm, VDI turret (Optional) shank diamter : 40mm
Axis : X-Z-B axis displacement : 18/24/24, X-traverse : 240 (225+15)mm, Z-axis traverse : 640mm, B-axis traverse : 545mm  with Empteezy 1000l swarf tipping bin (Asset 31115)

Lot 3: CMZ TBI-450MC CNC Lathe

Preview image

Bidding on this lot has finished

CMZ TBI-450MC CNC Lathe,S/N : 98383,YOM 1998 with IEMCA CNC Boss542 auto barfeed
HEADSTOCK : Maximum allowed diameter : 450mm, Maximum turning diameter : 300mm, Spindle nose : ASA 6" A2, Hydraulic chuck diameter : 160mm, External diameter on front bearings : 160mm, Internal diameter on front bearings : 85mm, Inside diamter of spindle : 55mm, Maximum bar capacity : 46mm, Maximum rotating speed : 6000rpm, Spindle motor power Kw : 14.5, Spindle moter power HP : 20
AXIS : X axis maximum travel : 150+25mm, Z axis maximum travel : 590mm, Distance between chuch and centres : 580mm, Rapid movement of X axis : 15m/min, Rapid movement of Z-axis : 20m/min, X axis torque : 10Nm, Z axis tordue : 14Nm
TAILSTOCK : Maximum travel of tailstock body : 500mm, Maximum travel of tailstock quill : 130mm, Diameter of tailstcok quill : 90mm, Morse taper of tailstock : No.5
TOOLS : Number of tools : 12, Tool section : 25 x 25mm
VARIOUS : Controls : GE Fanuc Series O-T, Capacity of cooling tank : 85l, Capacity of hydraulic oil tank : 50l, Capacity of lubrication oil tank : 2.7l, Fully installed power : 27KVA, Installation voltage : 380V50 Hz +5%, Approx weight : 3750kg, Dimensions : 2500mm L x 1450mm W x 1700mm high  with Empteezy 1000l swarf tipping bin (Asset 31107)

Lot 4: CMZ TBI-450MC CNC Lathe

Preview image

Bidding on this lot has finished

CMZ TBI-450MC CNC Lathe,with IEMCA CNC Boss542 auto barfeed
HEADSTOCK : Maximum allowed diameter : 450mm, Maximum turning diameter : 300mm, Spindle nose : ASA 6" A2, Hydraulic chuck diameter : 160mm, External diameter on front bearings : 160mm, Internal diameter on front bearings : 85mm, Inside diamter of spindle : 55mm, Maximum bar capacity : 46mm, Maximum rotating speed : 6000rpm, Spindle motor power Kw : 14.5, Spindle moter power HP : 20
AXIS : X axis maximum travel : 150+25mm, Z axis maximum travel : 590mm, Distance between chuch and centres : 580mm, Rapid movement of X axis : 15m/min, Rapid movement of Z-axis : 20m/min, X axis torque : 10Nm, Z axis tordue : 14Nm
TAILSTOCK : Maximum travel of tailstock body : 500mm, Maximum travel of tailstock quill : 130mm, Diameter of tailstcok quill : 90mm, Morse taper of tailstock : No.5
TOOLS : Number of tools : 12, Tool section : 25 x 25mm
VARIOUS : Controls : GE Fanuc Series O-T, Capacity of cooling tank : 85l, Capacity of hydraulic oil tank : 50l, Capacity of lubrication oil tank : 2.7l, Fully installed power : 27KVA, Installation voltage : 380V50 Hz +5%, Approx weight : 3750kg, Dimensions : 2500mm L x 1450mm W x 1700mm high  with Empteezy 1000l swarf tipping bin (Asset 31109)

Lot 5: CMZ TBI-450MC CNC Lathe

Preview image

Bidding on this lot has finished

CMZ TBI-450MC CNC Lathe with IEMCA CNC Boss542 auto barfeed (Please note this machine is spares and repairs only)
HEADSTOCK : Maximum allowed diameter : 450mm, Maximum turning diameter : 300mm, Spindle nose : ASA 6" A2, Hydraulic chuck diameter : 160mm, External diameter on front bearings : 160mm, Internal diameter on front bearings : 85mm, Inside diamter of spindle : 55mm, Maximum bar capacity : 46mm, Maximum rotating speed : 6000rpm, Spindle motor power Kw : 14.5, Spindle moter power HP : 20
AXIS : X axis maximum travel : 150+25mm, Z axis maximum travel : 590mm, Distance between chuch and centres : 580mm, Rapid movement of X axis : 15m/min, Rapid movement of Z-axis : 20m/min, X axis torque : 10Nm, Z axis tordue : 14Nm
TAILSTOCK : Maximum travel of tailstock body : 500mm, Maximum travel of tailstock quill : 130mm, Diameter of tailstcok quill : 90mm, Morse taper of tailstock : No.5
TOOLS : Number of tools : 12, Tool section : 25 x 25mm
VARIOUS : Controls : GE Fanuc Series O-T, Capacity of cooling tank : 85l, Capacity of hydraulic oil tank : 50l, Capacity of lubrication oil tank : 2.7l, Fully installed power : 27KVA, Installation voltage : 380V50 Hz +5%, Approx weight : 3750kg, Dimensions : 2500mm L x 1450mm W x 1700mm high with Empteezy 1000l swarf tipping bin (Asset 31108)

Lot 6: Mitsubshi FG15N Gas Forklift

Preview image

Bidding on this lot has finished

Mitsubshi FG15N Gas Forklift, S/N : EF34L 00603, YOM : 2007, Rated Capacity : 1500kg, Maximum Fork Height : 3290mm, Mast model : 5V15C33 with 10degs back tilt, Machine weight : 1602kgs (Asset 31122)

Lot 7: Boge Kompressoren Compressor

Preview image

Bidding on this lot has finished

Boge Kompressoren S6 Compressor, YOM 2000,S/N : 34288 (Asset 31122)

Lot 8: Burgmaster 'D500' 6 Spindle Turret Drill

Preview image

Bidding on this lot has finished

Burgmaster 'D500' 6 Spindle Turret Drill with 24" x 40" machine bed and 6" machine vice, S/N : 6131 (Asset 31110)

Lot 9: Burgmaster 'D500' 6 Spindle Turret Drill

Preview image

Bidding on this lot has finished

Burgmaster 'D500' 6 Spindle ' Turret Drill, 12" x 17" machine bed, S/N : 4844 (Asset 31111)

Lot 10: Burgmaster 'D500' 6 Spindle Turret Drill

Preview image

Bidding on this lot has finished

Burgmaster 'D500' 6 Spindle ' Turret Drill, 12" x 17" machine bed, S/N : 4775 (Asset 31112)

Lot 11: Burgmaster 'D500' 6 Spindle Turret Drill

Preview image

Bidding on this lot has finished

Burgmaster 'D500' 6 Spindle ' Turret Drill, 12" x 17" machine bed, S/N : 4067 (Asset 31113)

Lot 12: Burgmaster 'D500' 6 Spindle CNC Turret Drill

Preview image

Bidding on this lot has finished

Burgmaster 'D500' 6 Spindle CNC Turret Drill

Lot 13: Meddings Pillar Drills

Preview image

Bidding on this lot has finished

Meddings Pillar Drills , 17.5" x 38" machine bed, S/N :38901 & 38903 (31117)

Lot 14: Sealey 'SM35CE' Bandsaw

Preview image

Bidding on this lot has finished

Sealey 'SM35CE' Bandsaw
Capacity : 90deg Round : 170mm diameter, 90 deg Sq/Rect : 170mm H x 210mm W, 90 deg Bar : 50mm H x 300mm W, 45 deg Sq/Rect : 170mm H x 110mm W, Cutting speeds : 34, 41, 59 & 98mtr/min

Lot 15: Meddings Pillar Drill

Preview image

Bidding on this lot has finished

Meddings Pillar Drill, 11" x 10" table

Lot 16: Stayer 'TV 507' Pull Down Chop Saw

Preview image

Bidding on this lot has finished

Stayer 'TV 507' Pull Down Chop Saw, S/N : 070496

Lot 17: Clarke 2000ET Leader Automatic Scrubber

Preview image

Bidding on this lot has finished

Clarke 2000ET Leader Automatic Scrubber

 
Back to top